Hello!
I'm writing from scratch ADC-Hub software under OpenVMS...
Now, I have some skeleton and test it with StrongDC++ clients. At the moment I have some problem which I cannot resolving:
client A sending to Hub (get file list): DCTM 0002 0003 ADC/0.10 1814 3759097641 , this message is resending by my Hub to target client B, but client A don't receive anything.
Sorry for short and dumb description of the problem, but probably someone will point me to right direction.
Thanks!
DCTM problem ?
-
- Junior Member
- Posts: 13
- Joined: 15 Sep 2009, 12:08
- Location: Russia, Sankt-Petersburg
- Contact:
-
- Member
- Posts: 56
- Joined: 17 Aug 2009, 21:32
Re: DCTM problem ?
tons of possibilities...
1. was the correct IP in the INF ?
1. was the correct IP in the INF ?
-
- Junior Member
- Posts: 13
- Joined: 15 Sep 2009, 12:08
- Location: Russia, Sankt-Petersburg
- Contact:
Re: DCTM problem ?
Hello!
Resolved the problem.
Thanks!
Resolved the problem.
Thanks!
-
- Senior Member
- Posts: 328
- Joined: 04 Dec 2007, 07:25
- Location: Bucharest
- Contact:
Re: DCTM problem ?
Since you posted out your problem and solved it, perhaps you can also post the solution, it might be interesting for other developers if they come across it. So please when you get the chance post the exact problem and solution you have.
Thanks a lot !
Thanks a lot !
Just someone
-
- Junior Member
- Posts: 13
- Joined: 15 Sep 2009, 12:08
- Location: Russia, Sankt-Petersburg
- Contact:
Re: DCTM problem ?
Hi!
About of the resolving the problem ... never mind, it was a dumb programming error.
About of the resolving the problem ... never mind, it was a dumb programming error.