Simple redirection

Discussion and questions about hub software
Post Reply
SysMan
Junior Member
Posts: 13
Joined: 15 Sep 2009, 12:08
Location: Russia, Sankt-Petersburg
Contact:

Simple redirection

Post by SysMan » 02 Oct 2009, 12:00

Hi, All!

What is the sequence must be used before IQUI ? For example: TCP- connection established->HUB send: ISID <sid>\nIQUI <sid> RD... ->close TCP-connection. Right ?

Toast

Re: Simple redirection

Post by Toast » 02 Oct 2009, 13:33

- [15:43:04] *** <ADC>IQUI D67K IDRCHH RD127.0.0.1</ADC>
- [15:43:04] *** Press the follow redirect button to connect to 127.0.0.1

in its raw form from DC++ ADC Debug :) hope this helps

Pietry
Senior Member
Posts: 328
Joined: 04 Dec 2007, 07:25
Location: Bucharest
Contact:

Re: Simple redirection

Post by Pietry » 02 Oct 2009, 13:53

According to the spec, QUI can be received at any time after protocol negotiation ( SUP ), so your example is correct, however there are more possible situation ( QUI can come at any time in the states IDENTIFY, VERIFY, NORMAL )
Just someone

SysMan
Junior Member
Posts: 13
Joined: 15 Sep 2009, 12:08
Location: Russia, Sankt-Petersburg
Contact:

Re: Simple redirection

Post by SysMan » 02 Oct 2009, 16:28

Thanks a lot!

Post Reply